Frame Jet 10′ Frame Rail Cleaning Hose
Pressure Washer Attachment for Cleaning Inside Frame Rails
$150.00
A 10′ jetting hose for your pressure washer that feeds into frame rails and sprays forward and backward at once, flushing out salt, mud and scale before you undercoat.
- 10′ ¼″ jetting line
- Forward and backward spray (190° reach)
- Rated to 5,000 psi and 150°F
- Standard pressure washer quick connect
17 in stock
Clean Out Frame Rails Before You Undercoat
Salt, mud and loose scale collect inside boxed frame rails, right where undercoating needs to reach. The Frame Jet is a 10′ jetting hose that feeds into the rail and sprays forward and backward at the same time, flushing the inside clean without working at awkward angles.
- 10′ ¼″ jetting line reaches the full length of the frame
- Nozzle sprays forward and backward at once (190° reach)
- Connects to a pressure washer trigger gun with a standard quick connect
- Rated to 5,000 psi and 150°F; 12,000 psi burst pressure
How to Use It
Connect
Attach the Frame Jet to your pressure washer trigger gun with the quick connect.
Feed and flush
Feed the hose into the frame rail through an access hole and spray as you pull it back out.
Dry, then protect
Let the rail dry completely, then treat rust and apply NHOU® undercoating.
Safety: stay within the pressure rating of the hose and your pressure washer, and wear eye protection.
Good For
Finish the Job
Salt-Brine Eliminator
Foam it onto the undercarriage to break down road brine and embedded salt before you flush the rails.
Shop Salt-Brine EliminatorNHOU® Undercoating
Seal the clean rails with Original Oil or V3. Rusty frames may need Rustoration first.
Original OilRustoration
