COMMERCIAL-GRADE RUST CONVERSION NHOU® Rustoration® Rust Converter & Prep
DIRECTIONS
- Prepare the surface by removing loose rust and paint flakes with a wire brush or sanding. Grind or sandblast if necessary.
- Use a water-based cleaner to remove grease, oil, and dirt from the surface.
- Spray directly from the bottle, and pour into a non-metallic container or apply with a conventional spray gun at 40-45 psi. Do not return any unused material back into the bottle.
- After application, the surface will take on a white, ash-like appearance within 20 minutes. If any areas are not grey after 20-30 minutes, reapply to the dry surface and wait an additional 20-30 minutes.
- After the rust is converted, wipe the surface with a clean water-dampened cloth or light abrasive scuff pad to remove the white, chalky residue. Allow the surface to dry completely before applying NHOU® Undercoating at 70°F.
- Surface must be coated with a sealant (undercoating, paint, or sealing primer) within 4-8 hours.
⚠️ WARNING – CORROSIVE
Causes severe eye & skin burns. Harmful if swallowed or inhaled.
Precautions
-
Keep out of reach of children.
-
Use only outdoors or with ventilation.
-
Do not breathe mist/vapors.
-
Avoid contact with eyes/skin.
-
Wash hands after use.
Protective Gear
-
Wear goggles/face shield, acid-resistant gloves, long sleeves/pants, and closed shoes.
-
Use a respirator if ventilation is poor.
First Aid
-
Eyes: Rinse 15 min, get medical help.
-
Skin: Rinse with water, remove contaminated clothing.
-
Inhaled: Move to fresh air.
-
Swallowed: Do not vomit; rinse mouth, get help.
Storage
Store closed, cool, dry. Keep away from bleach/alkalis. Dispose per local regs.
NOTE: Galvanized steel must be sanded with medium or fine-grit sandpaper before application. If a spray gun is used, clean the applicator equipment with water.

Buy US Direct
Buy CA Direct
Buy EU Direct
Buy DE Direct

Reviews
There are no reviews yet.