NHOU® RUSTORATION® -Prep Smart, Protect Long: Rust Conversion Made Easy

COMMERCIAL-GRADE RUST CONVERSION
NHOU® Rustoration® Spray On Rust Converter & Prep

Seal the Deal Against Rust: Convert and Conquer

NHOU® Rustoration® Rust Converter & Prep is your first line of defense in the battle against corrosion. Specially formulated to work seamlessly with NHOU® Oil Undercoating, this rust converter doesn’t just mask rust—it transforms it.

Key Features:

• Rapid Transformation: Converts rust into a white, etched zinc phosphate in just 30 minutes, providing a solid foundation for undercoating.

• Enhanced Protection: The converted surface allows NHOU® Oil Undercoating to penetrate deeply, sealing out oxygen and moisture—critical elements that contribute to rust formation.

• Eco-Friendly Formula: Water-based and non-hazardous, ensuring safety for both the user and the environment.

• Versatile Application: Suitable for various metal surfaces, making it an essential tool for vehicle maintenance and restoration.

Why Choose NHOU® Rustoration® Rust Converter & Prep?

• Synergistic Performance: Designed to complement NHOU® Oil Undercoating, ensuring maximum adhesion and long-lasting protection.

• Time-Efficient: Quick-drying formula means you can proceed with undercoating in just half an hour.

• Cost-Effective: Prevents further rust damage, saving you from expensive repairs down the line.

Application Instructions:

1. Surface Preparation: Remove loose rust and paint flakes using a wire brush or sanding. For heavily rusted areas, consider grinding or sandblasting.

2. Cleaning: Use a water-based cleaner to eliminate grease, oil, and dirt.

3. Application: Spray directly from the bottle or use a conventional spray gun at 40-45 psi. Ensure even coverage.

4. Drying: Within 20-30 minutes, the surface will exhibit a white, ash-like appearance. If areas remain unconverted, reapply as needed.

5. Final Steps: Wipe the surface with a damp cloth or light abrasive pad to remove residue. Allow to dry completely before applying NHOU® Oil Undercoating.

Note: For galvanized steel, sand with medium or fine-grit sandpaper before application. Clean applicator equipment with water after use.

By integrating NHOU® Rustoration® Rust Converter & Prep into your maintenance routine, you’re not just treating rust—you’re preventing it. Ensure your vehicle’s longevity and structural integrity with this essential preparatory step

DIRECTIONS

1. Prepare the surface by removing loose rust and paint flakes with a wire brush or sanding. Grind or sandblast if necessary.
2. Use a water-based cleaner to remove grease, oil, and dirt from the surface.
3. Spray directly from the bottle, and pour into a non-metallic container or apply with a conventional spray gun at 40-45 psi. Do not return any unused material back into the bottle.
4. After application, the surface will take on a white, ash-like appearance within 20 minutes. If any areas are not grey after 20-30 minutes, reapply to the dry surface and wait an additional 20-30 minutes.
5. After the rust is converted, wipe the surface with a clean water-dampened cloth or light abrasive scuff pad to remove the white, chalky residue. Allow the surface to dry completely before applying NHOU® Undercoating at 70°F.
6. Surface must be coated with a sealant (undercoating, paint, or sealing primer) within 4-8 hours.

NOTE: Galvanized steel must be sanded with medium or fine-grit sandpaper before application. If a spray gun is used, clean the applicator equipment with water.

SDS Rust Prep