Home » Shop » NHOU® Salt-Brine Eliminator
nhou marine aerosol
NHOU® Marine Corrosion Guard Aerosol Price range: $34.78 through $166.92
Back to products

NHOU® Salt-Brine Eliminator

Price range: $54.09 through $2,052.09

Salt & Brine Remover, the Prep Step Before Undercoating

The prep step before undercoating. NHOU® Salt-Brine Eliminator is engineered to break down the sticky additives in modern road brines and remove magnesium, calcium and sodium chloride salts from your undercarriage, without a brush, so NHOU® protection goes onto a clean surface.

  • Thick foaming action for heavy-duty use
  • No caustics, phosphates or petroleum solvents
  • 1, 5 and 55 gallon sizes

Apply with a foam gun, rinse, let dry, then protect with NHOU® undercoating.

Add $100.00 to cart and get free shipping!
Description
Step 1 for heavy rust

Convert the Rust, Then Seal It

Undercoating protects metal, but heavily rusted surfaces need treatment first. NHOU® Rustoration® doesn’t just cover rust, it transforms it, converting it into a white, etched zinc phosphate surface in about 30 minutes.

That converted surface gives NHOU® Oil Undercoating a solid foundation to penetrate and seal out oxygen and moisture.

NHOU Rustoration Rust Converter and Prep 1 gallon

What It Does

  • Converts rust into a white, etched zinc phosphate
  • Ready for undercoating in about half an hour
  • Made to work with NHOU® Oil Undercoating
  • Water-based; spray straight from the bottle or with a conventional spray gun
  • For vehicles, trailers and equipment with heavy rust

See the full heavy rust plan →

How to Use It

01

Prep

Remove loose rust and paint flakes with a wire brush or sanding. Grind or sandblast if necessary.

02

Clean

Remove grease, oil and dirt with a water-based cleaner.

03

Apply

Spray from the bottle, or pour into a non-metallic container and use a conventional spray gun at 40–45 psi. Don’t pour unused material back into the bottle.

04

Check

The surface turns white and ash-like in about 20 minutes. If areas aren’t converted after 20–30 minutes, reapply to the dry surface and wait another 20–30 minutes.

05

Wipe and seal

Wipe off the chalky residue with a damp cloth or light scuff pad. Let it dry completely, then apply NHOU® undercoating (at 70°F) within 4–8 hours.

Note: Sand galvanized steel with medium or fine-grit sandpaper first. Clean spray equipment with water.

Warning: Corrosive

Causes severe eye and skin burns. Harmful if swallowed or inhaled. Keep out of reach of children.

  • Use only outdoors or with good ventilation, and don’t breathe mist or vapors.
  • Wear goggles or a face shield, acid-resistant gloves, long sleeves and pants, and closed shoes. Use a respirator if ventilation is poor.
  • Store closed in a cool, dry place, away from bleach and alkalis. Dispose of per local regulations.

First aid: Eyes: rinse for 15 minutes and get medical help. Skin: rinse with water and remove contaminated clothing. Inhaled: move to fresh air. Swallowed: do not induce vomiting; rinse mouth and get help.

See the SDS Info tab for full safety information.

Finish the Job

Step 2: protect

NHOU® Original Oil Undercoating, Black

Seal the converted surface. Creeps into seams to help prevent new rust.

Shop Oil Undercoating
Done for you

Find an Applicator

Heavy rust is a big job. A local NHOU® Authorized Applicator can look at your vehicle and recommend the right treatment.

Find an Applicator

Learn more about Rustoration® →

Additional information
Size1 Gallon, 5 Gallon, 55 Gallon
BrandNHOU
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SDS Info

Salt Eliminator