NHOU® Salt-Brine Eliminator-Strips the Brine. Sets the Stage

This salt remover was developed and manufactured under stringent controls to consistent, exacting standards and formulated specifically to be used before and in conjunction with NHOU® Protective Coatings

⦁ Thick foaming action
⦁ Designed for heavy-duty application
⦁ High concentration NHOU® Salt-Brine Eliminator contains actives that dissolve, release and remove brine and salt crystals from any surface
⦁ Effectively removes harmful magnesium/calcium/sodium chloride salts and soils without a brush.
⦁ No caustics, phosphates, or petroleum solvents

• We Don’t Add Products. We Add Solutions.

Rainwater, soap, and freshwater undercarriage washings may remove a small amount of the corrosive products if any and will more likely wash the corrosive products into cracks and crevices where they can accumulate and add to increased damage.

Unlike conventional salt removers, NHOU® Salt-Brine Eliminator has been specifically engineered to address sticky additives found in deicing solutions.  This is necessary to release and remove salt embedded in the undercarriage, including the hard-to-reach cracks and crevices. 

Here’s what you can do with our product

⦁ Automotive: Cars, Trucks, Trailers, Vans, Buses, and Bikes
⦁ Substrates: Plastics, Rubber, Vinyl, Carpet, Metal, Upholstery, and leather
⦁ Heavy Machine Washing
⦁Use for hosing down the entire boat and or mechanical parts exposed to salt environments, Protects aluminum, copper, brass, mild steel with over 99% effectiveness.

Application Instructions:

1. Preparation: Ensure the surface is free from heavy mud or debris. Pressure wash if necessary.NHOU+2NHOU+2NHOU+2

2. Application: Using a foam gun, apply the NHOU® Salt-Brine Eliminator to the entire undercarriage, focusing on seams, cracks, and crevices.NHOU+9NHOU+9NHOU+9

3. Dwell Time: Allow the product to sit for a few minutes to penetrate and break down contaminants.

4. Rinse: Thoroughly rinse the area with water, avoiding high-pressure undercarriage washing to prevent pushing contaminants deeper into crevices.NHOU+3NHOU+3NHOU+3

5. Drying: Allow the surface to dry completely before applying NHOU® Protective Coatings.NHOU+2NHOU+2NHOU+2

Note: For optimal results, use the NHOU® Salt-Brine Eliminator as a preparatory step before applying NHOU® Oil Undercoating.NHOU+1NHOU+1

Experience the NHOU® Difference

At NHOU®, our mission is to solve real-world problems with practical solutions. The Salt-Brine Eliminator embodies this philosophy, offering a product that doesn’t just add to our lineup but elevates the standard for vehicle preparation and protection.

More info